Text us

← Blog · 4 min read

How Much Does TV Mounting Cost in 2026? Prices by Wall Type

The price of mounting a TV depends less on the TV and more on what's behind your wall. Here's what actually drives the cost.

Most "TV mounting cost" articles quote a single number, which is misleading — the wall matters more than the TV. A 55" TV on open studs takes 30 minutes. The same TV on brick or over a fireplace can take two hours and different hardware entirely. Here's how the real pricing breaks down.

Price by wall type

Wall typeTypical rangeWhy
Drywall, studs accessible$140–$170Fastest job — anchors go straight into studs
Drywall, no studs at mount height$150–$190Rated toggle anchors needed, more careful load calc
Brick or stone$200–$280Masonry bit required, slower drilling, risk of cracking
Concrete / block$220–$320Hardest material, specialty anchors, longer labor time
Over a fireplace$180–$260Often masonry + working at height + heat clearance rules

What adds to the base price

  • Wire concealment — running cables inside the wall instead of a visible cable channel: +$30–$50
  • Soundbar mounting — mounted and wired to the TV at the same visit: +$25–$40
  • TV size over 65" — heavier mount, usually needs two people: +$20–$40
  • Full-motion mount vs fixed — more adjustment and leveling: +$15–$25
The one thing that changes everything: what's actually inside the wall. A stud finder reading is not the same as knowing what's behind drywall in a 1990s stucco home vs. new construction. This is why accurate quotes need a photo of the wall, not just a TV size.

Cheap TV mounts you'll pay for later

The lowest quotes online usually assume the easiest case — studs, drywall, no wire concealment. If your wall doesn't match that, the price changes on-site, which is where "surprise fees" come from. Getting a photo-based quote upfront avoids that entirely.

Need this done in Corona, IE, or OC?

Text a photo and your ZIP — Russell replies with pricing in minutes.

📱 Text Russell now

FAQ

Is it cheaper to mount a TV myself?

A basic mount on studs is doable DIY with the right anchors. Brick, concrete, or over a fireplace is where most DIY attempts go wrong — cracked tile, pulled anchors, or a TV that isn't level.

Does wire concealment always add cost?

Yes, because it means cutting into the wall or fishing a cable kit through the cavity, which takes real time compared to a surface-mounted cable channel.

How long does a standard TV mount take?

45–90 minutes for drywall with accessible studs. Brick, concrete, or fireplace mounts can take 90–150 minutes.

Related services

Text Form Call